Can you remote start a 2010 Mitsubishi Lancer?

2010 Mitsubishi Lancer · Turn a key

Supported by a documented setup

Yes. A documented setup exists for this configuration.

Applies to
2010 Mitsubishi Lancer, turn a key.
Key restrictions
Not yet verified for this setup.

Source: Fortin install guide #119301, checked

Always confirm with your installer or the manufacturer

Manufacturer guide reviewed: Listed in Fortin install guide #119301 as of · page 1

What this means for you

Check first
Some vehicles already have factory remote start. Check your key fob and owner's manual before buying anything.
How you control it
Not yet verified for this setup.
Extra equipment
The documented setup uses a bypass module (details below). A remote or phone app kit is chosen with your installer.
Key limitations
Not yet verified for this setup.
When you get in
Not yet verified for this setup.
Manual transmission
Not yet verified for this setup. A qualified installer must check the transmission requirements and safety procedures.

Next step

Find an installer for this vehicle

Contact installers directly. Your vehicle details stay in this link.

Technical detail

Documented setups (1)

Setup 1: Fortin

Module
EVO-ONE
T-harness
Not listed in guide
Minimum firmware
86.16
Transmission
Not listed in guide

Restrictions: Not yet verified for this setup.

Recorded note: Row built from Fortin guide index entry Your installer must check this note against the full guide.

Manufacturer guide reviewed: Listed in Fortin install guide #119301 as of · page 1

Manufacturer listing seen: Fortin guide index, checked

Review history
  • : Imported existing legacy evidence and its recorded date; this migration is not a new source review.

The answer above is for the vehicle. A field can still be blank in the guide page we reviewed. Your installer checks the full guide.

All Mitsubishi Lancer configurations (3)

Each answer applies only to its own configuration. This page is highlighted.

Vehicle configurations by year and how you start them
YearsHow you start itAnswerEvidence
2011 to 2017 Mitsubishi Lancer Start method not stated, Fast KeylessStart method not stated, Fast KeylessUnverified

Manufacturer listing seen: Fortin vehicle page, checked

2011 to 2017 Mitsubishi Lancer Turn a keyTurn a keyUnverified

Manufacturer listing seen: Fortin vehicle page, checked

2010 Mitsubishi Lancer Turn a key (this page)Turn a keySupported by a documented setup

Manufacturer guide reviewed: Listed in Fortin install guide #119301 as of · page 1

Open the full Lancer model table

Sources

Manufacturer listing seen: Fortin guide index, checked

Manufacturer guide reviewed: Listed in Fortin install guide #119301 as of · page 1

Firmware reference: Fortin guide PDF p.1.

Other manufacturer lookups

Lookup links checked . Confirm the exact configuration in each lookup.

Dates describe the source review recorded for this configuration. A rebuild does not change them. We link to official guides; we do not host them.

Report a mistake or request a review.

Questions we get

Can I add remote start to a 2010 Mitsubishi Lancer?

Yes, aftermarket remote start is supported (per Fortin guide #119301). This entry covers Standard Key. Always confirm the exact vehicle with a certified installer.

What module does it need?

EVO-ONE, as recorded from the Fortin source. Have an installer confirm the current guide.

Does it work with push-to-start?

This entry covers Standard Key. It does not establish compatibility for a different ignition variant; check a matching entry and manufacturer guide.

Where can I get it installed in Calgary?

No Calgary installers are listed here yet. Ask a certified installer to verify your exact year, ignition type and transmission before buying.

Other Lancer years

Other Mitsubishi models

Answers come from the sources listed on each page, with the date we reviewed them. Guides change and configurations differ, so your installer confirms the exact setup before any work.